AN-07 · Chapter 2 · Analog & Op-Amps
Amplify 1 µV at 10 MHz to 1 V
How would you amplify a 1 µV, 10 MHz signal to 1 V?
| Level | ●●● onsite design / senior |
| Track | General board |
| Really testing | Asking the right questions before designing; gain staging; noise. |
Full worked answer: in the book, page 46 — what to say first, how to explain it, the numbers worth quoting and the follow-ups. About the book →
Going deeper
Extra explanation that is not in the book: worked numbers, where people go wrong, and how to say it in the room.
Going deeper for this question is coming.
Errata
No corrections known for this question. All errata
Ask about this question
Stuck on a step, or think something is wrong? Send it with AN-07 in the subject. Good questions get answered on this page, and corrections go into the next printing.
Related
← AN-06 AC-coupled BJT amplifierAN-08 Photodiode TIA with a 10 MΩ feedback resistor →