AN-08 · Chapter 2 · Analog & Op-Amps
Photodiode TIA with a 10 MΩ feedback resistor
A photodiode feeds a transimpedance amplifier with a 10 MΩ feedback resistor. What problems do you expect?
| Level | ●● onsite technical |
| Track | General board |
| Really testing | Noise, bandwidth, stability of TIAs. |
Full worked answer: in the book, page 48 — what to say first, how to explain it, the numbers worth quoting and the follow-ups. About the book →
Going deeper
Extra explanation that is not in the book: worked numbers, where people go wrong, and how to say it in the room.
Going deeper for this question is coming.
Errata
No corrections known for this question. All errata
Ask about this question
Stuck on a step, or think something is wrong? Send it with AN-08 in the subject. Good questions get answered on this page, and corrections go into the next printing.
Related
← AN-07 Amplify 1 µV at 10 MHz to 1 VAN-09 Op-amp driving an ADC oscillates →